This blog has moved

This blog has re-located to Chester

Thursday 10 June 2010

Twenty Test Ride

I decided to go to work on the Twenty today, it has a front brake now and a Dutch-style O-lock so it can be used(After my first post a user from http://raleightwenty.webs.com/ told me that the mount I recognised as an O-lock mount is also used to mount a pletscher rack).  My first impression of the ride was that the bike deserves its cult status.  It is very comfortable and for someone a bit shorter than me would provide a nice upright riding position (I have to have the seat too high for a perfectly straight back).  The bike doesn’t have the overly twitch steering common to smaller wheeled bikes, making it very pleasant to cruise about on.  The stock gearing is pretty high, with a 15 tooth sprocket on the hub making third gear pretty much redundant.  I have a few spares knocking about so I will have to fiddle about to find the optimum.

I had heard that bikes with steel rims (and calliper brakes)had pretty feeble braking made worse by water.  The front brake at first seemed reasonable considering its advanced years.  I made the mistake of passing through a puddle and getting the rims wet, it was only a few minutes later I had to brake and when I did I genuinely thought my brake lever was jammed because the wet brakes provide absolutely no friction.  They may warrant further research to provide new ultra low-friction materials for the future.  Suffice to say I will be looking into alternative solutions to the braking issue as the project progresses.

2 comments:

  1. Great to find your blog! I live and cycle in Manchester too. I had a BSA Twenty (which I bought for £8!) before I got my Pashley and I loved it. Really comfy and speedy too! Like what you've done with yours!

    ReplyDelete
  2. They are really nice to ride. the fact that it is older than me and still works this well is what I really appreciate though.

    ReplyDelete

This blog has moved to Chester. All the old posts can be found at Chester Cycling where I invite you to continue the discussion instead

Note: only a member of this blog may post a comment.