This blog has moved

This blog has re-located to Chester

Friday 25 March 2011

Towpath Closure Mystery Solved

I managed to get a decent amount of time out of the bike yesterday. Before leaving the city centre, I bumped into LC and Northwest Is Best who were taking pictures for their new joint project. I cycled into the city with LC who was on her Pashley, Vita. We cycled through the newly re-designed junction on Booth Street East, which seems to have been re-designed with the aim of decreasing cyclist safety and discouraging cycling.

When the weather is nice, I usually travel to Rochdale by riding to Failsworth and then continuing along the canal. As the weather was so nice, and the traffic so bad, I decided to get onto the Rochdale canal in the city centre and use it all the way. This goes through some of the less bike-friendly parts of the route and some of the more dilapidated parts of Manchester, but was still fairly pleasant.

I had previously spotted that a section of the Rochdale canal towpath was closed, at the time it seemed to be for no apparent reason.

CIMG2474

The beginning of the closed section. Yes I am riding the towpath on a Brompton

The crushed gravel surface is new. This section of the canal had previously been nothing more than a narrow rut in the earth, forming one of the two sections of the route which were essentially impassable after rainfall.

CIMG2475

The work has not yet finished, the crushed gravel path ends abruptly and the old path can be seen continuing on.

CIMG2476

Further on some of the groundwork had been completed but the crushed gravel surface has not yet been put down.

CIMG2478

The crushed gravel path returns a bit further along, suggesting that this whole section of canal will have a lovely new path.

The fun wasn’t over yet though, as I reached Sandbrook Park, I noticed my steering was off and looked down to see a front wheel puncture, the first front wheel puncture I’ve had in my entire life. Luckily I had a spare tube, unluckily my mini-pump is Presta only, and Brompton-sized tubes are generally Schraeder. I later managed to borrow a pump and get the bike into good shape for my ride home later that evening (On-road, via Oldham to avoid the ups and downs).

Vehicular cycling can be nice when there are no other vehicles on the road.

4 comments:

  1. Ah! The old Presta pump with a Schraeder valve problem. Not good. :-(

    I have a pump which can be altered to fit either valve type. Not needed it for a puncture since using Schwalbe Marathon tyres but you never know! ;-)

    ReplyDelete
  2. 't was lovely seeing you yesterday MrC! And sharing that short cycle into the city centre. I'll try and cycle round that cross junction again with a camera next time, just to show the new redesign... see you tomorrow!

    ReplyDelete
  3. I've never seen a mini-pump that was Presta-only and I've had a few. Something to look out for when I buy another pump. My bikes are variously, Schaeder, Presta and Woods/Dunlop (I remember them from decades ago in the UK, seemingly old-fashioned but fit Presta pumps).

    http://en.wikipedia.org/wiki/Valve_stem#Dunlop_.28or_Woods.29

    ReplyDelete
  4. @Middleagecyclist

    The Brompton is the only bike with schraeders, so the pump issue is only minor. I can always hop on a bus if I get a puncture on the Brompton.

    @naturallycycling

    I've used that junctions a few more times and I still can't see what they were thinking. It is good to limit right turning motor traffic but not providing cycle infrastructure is unforgivable. It isn't finished yet though, they may improve it somehow.

    @amoeba

    The pump in question is aimed at owners of racing bikes, it is probably presta-only to "save weight." It does work with woods valves too (as used to be on my DL-1), although I suspect that wasn't part of the original design brief.

    ReplyDelete

This blog has moved to Chester. All the old posts can be found at Chester Cycling where I invite you to continue the discussion instead

Note: only a member of this blog may post a comment.